Emerson HF948BS02 Manual De Instrucciones página 10

4. How to Hang Your Ceiling Fan
4.2
On Wood Joist - Locate and drill a pilot hole in the wood
joist. Install the screw type J-hook so that hook extends
CAUTION: The pilot hole should be drilled no larger 2-1/2" below the outlet box (Figure 12).
than the minor diameter of the screw threads on the
hook (1/4" max.). Do not put a lubricant on the
J-hook. At least 1-1/2" of the screw threads should be
secured into the structural wood joist.
WARNING
!
Read and follow instructions carefully. Failure to comply
with instructions could result in risk of fire, electric
shock, fan falling and injury to persons.
WARNING
!
J-Hook must be supported by building structure.
4.3
Lift the fan onto the J-hook and position as shown in
Figure 13.
Make sure the motor wires and retention cable at the top of
the hanger pipe are positioned behind J-hook as illustrated
CAUTION: The electrical wires and retention cable
in Figure 13.
must not be placed between the rubber roller and the
hook, but rather as illustrated in Figure 13.
WOOD JOIST
1-1/2"
2-1/2"
Figure 12
Figure 13
10
(Continued)
WOOD JOIST
OUTLET BOX
J-HOOK
RETENTION
CABLE
WIRES (3)
U.L. Model No.: HF948 & HF956