Adjustment Instructions - Notch Sentinel Manual Del Usuario

ADJUSTMENT INSTRUCTIONS:

Adjust the fit of your harness so that your body is supported
with weight evenly distributed between the belt and leg straps,
balanced to hang upright and relaxed, without uncomfortable
pinching or pressure. Fit the harness before your first climb
where you can hang.
Choose the correct size:
hipbelt min.
(elastic, not stretched)
72 cm 28,35 in
1
92 cm 36,22 in
2
hipbelt max.
1 100 cm 39,37 in
130 cm 51,18 in
2
BRIDGE STRAP ADJUSTMENT:
• Locate the Bridge strap buckle positioned between the Bridge
• Using thumb pull back on the tension buckle releasing the
• Fold the excess strap into the elastic leg strap keeper
hipbelt min.
(webbing)
75 cm 29,53 in
95 cm 37,40 in
legloops min.
50 cm 19,69 in
65 cm 25,59 in
• Tightening the adjustment straps will bring the bridge closer
anchor plate and the Side D ring
webbing to extend distance (Fig 2), to shorten simply loosen
webbing and work it back through the tension buckle
to your body while loosening them will move the bridge away
from your body.
Fig 2