Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation:
5
Insert second coupler into other opening of elbow.
Measure distance between centreline of top coupler and ceiling, and cut length of lineset
6
cover to suit. Disassemble lineset cover and fit bottom half between top coupler and
ceiling. Ensure this is plumb and secure to wall using screws and plugs provided.
FALSE CEILING
90º
7
Temporarily remove both couplers
from the elbow.
9
INSTALLATION INSTRUCTIONS (FOR LINESET COVERS A AND B) CONTINUED IN SECTION
CALLED 'INSTALLATION - PUMP ASSEMBLY'. (PG 7)
5
CUT TO LENGTH
8
Cut out area of ceiling above
lineset cover.
Installation: Wall-mounted Lineset Cover - B
ASP-MLS & ASP-MAXLS PUMP FOR SLIMDUCT SD77 SERIES AND LINEHIDE CD
75 SERIES.
Select left or right hand side of evaporator for lineset, drain & electrical connections.
1
A
Disassemble elbow. Place elbow back flat on wall at least 2" away from unit to
2
allow space for flashing. Line up bottom of elbow with bottom of evaporator unit,
make sure elbow is plumb, and secure to wall using screws and plugs provided.
MINIMUM 2"
MUST BE
LEVEL
4
Measure distance between elbow and ceiling, allowing for protrusion into elbow, cut length of
lineset cover to fit. Disassemble lineset cover and fit bottom half between elbow and
ceiling. Ensure this is plumb and secure to wall using screws and plugs provided.
FALSE CEILING
90º
CUT TO LENGTH
6
INSTALLATION INSTRUCTIONS (FOR LINESET COVERS A AND B) CONTINUED IN SECTION
CALLED 'INSTALLATION - PUMP ASSEMBLY'. (PG 7)
B
3
Cut length of lineset cover to suit gap between
evaporator and elbow, allowing for protrusion
into elbow. Disassemble lineset cover and fit
bottom half between elbow and evaporator.
Secure to wall using screws and plugs provided.
CUT TO LENGTH
5
Cut out area of ceiling above lineset cover.
6
Tabla de contenido
