Tabla de contenido
5.5
Troubleshooting
Fault found
The cleaner fails to start
Dust is leaking out
The vacuum cleaner does not work as it
should
Motor very noisy.
Warning!
For any other problems, contact the GHIBLI&WIRBEL after-sales service.
Possible fault
No power
Perforated vacuum pipe
Perforated filter
Filter unsuitable for type of job
Pipe perforated or blocked
Container full
Filter blocked
Seals worn
Air leak
Contact GHIBLI&WIRBEL after-sales
ENGLISH - 29 -
Recommended remedy
Check the power mains supply
Check the integrity of the plug
and power cable
Replace the pipe
Replace the filter
Fit a suitable filter for the type
of material to be vacuumed
Check the pipe and, if
necessary, replace it
Empty container
Clean the filter and if necessary
change it.
Check the seals and, if
necessary, replace it
Check for any air leaks out of
closing fasteners, tightening
screws, container or filter
chamber
Capítulos
Tabla de contenido
