System Lay-Out; Technical Features - RIB RAPID N Manual De Instrucciones

SYSTEM LAY-OUT

280/11,2"x300/12"
❶
❷
❸
❷
❸
❷
❸
1 - RAPID N barrier
2 - Photoelectric cells
3 - Galvanized column for P.E. cells
4 - Strip with Photo electric cells
Parts to install meeting the EN 12453 standard
COMMAND TYPE
with manned operation
with visible impulses (e.g. sensor)
with not visible impulses (e.g. transmitter)
automatic
* a typical example are those shutters which do not have access to any public way.
A: Command button with manned operation (that is, operating as long as activated), like code ACG2013.
B: Key selector with manned operation, like code ACG1010.
C: Safety edges, like code ACG3010 and/or other safety devices to keep thrust force within the limits of
EN12453 regulation - Appendix A.
D: Photocells, like code ACG8026.
❺
5 - Magnetic loop
- Key selector
- Tuned aerial
USE OF THE SHUTTER
Skilled persons Skilled persons
(out of a public area*) (public area)
A B
C C
C C e D
C e D C e D
6000/236"

TECHNICAL FEATURES

❹
Ambidextrous irreversibile operator endowed with a control panel, used for the
intesive movement of boom arms from 3 to 6 m long.
The cabinet of the operator is treated with cataphoresis and thermal spray
coating.
❷
The barrier boom can be supplied as a single piece or, in the case high objects
may hinder its travel, you can require it in the articulated version, specifying the
height of this obstacle from the ground.
The barrier boom with RIB profile is constructed for being fitted with a pneumatic
❸
safety strip or with a photocell strip.
N.B. You must make installation features comply with laws and standards in
force.
TECHNICAL
❷
DATA
❸
Max. boom lenght
Opening time
EEC Power supply
❷
Motor capacity
❸
Power absorbed
Capacitor
Max. torque
Power supply
2
Motor capacity
Power absorbed
Capacitor
Max. torque
Normative cycles 230V
Normative cycles 120V
Daily operations suggested
Service
Unrestricted use
Guaranteed consecutive cycles
-
Lubrification
C e D
Weight of electroreducer
C e D
Working Temperature
C e D
Protection IP
ASSEMBLING RAPID N
After you have cemented in the base plate where you want it, mount RAPID N
using the nuts provided and a no. 19 hexagonal wrench.
25
Measurements
in mm/inch
1
RAPID N
m/in 6/236"
s 6
230V~ 50Hz 220V~ 60Hz
W 242 285
1,07 1,31
A
µF 10 10
Nm/lbsm 155/70 141/64
120V~ 60Hz
W 186
A 2,07
25
µF
Nm/lbsm 105/47,7
2400 - 6s/2s
n°
2400 - 6s/2s
n°
n° 1500 for boom 3-4-5-6 m
100%
1500 for boom 3-4-5-6 m
n°
SHELL OMALA S2 G100
62
kg
°C -10 ÷ +55
IP 54
G
B