Installation Instructions - Festo CPX-FB13 Manual Del Usuario

3

Installation instructions

3.1 Fitting
Field bus node CPX-FB13 is mounted in a manifold sub-
base of the CPX terminal.
Screws, tightening
1
torque 0.9...1.1 Nm
2 Field bus node
CPX-FB13
3 Contact rails
4 Manifold sub-base
Dismantling
Remove the screws and carefully lift up the field bus
S
node.
Fitting
1. Check the seal and sealing surfaces and refit the sub-
base.
2. Place the screws so that the self-cutting threads are
used. Tighten the screws by hand in diagonally oppo-
site sequence. Tightening torque 0.9...1.1 Nm.
Festo CPX-FB13 0201NH English
1
2
3
4
15