Mounting A Filter; Focus Limit Switch; Focus Stop Buttons; Shooting Cautions - Olympus ZUIKO DIGITAL ED300mm f2.8 Manual De Instrucciones

Mounting a Filter

1.
ND4-43/ND8-43
2. Drop-in PL filter DPF-43
① Attach the DPF-43 drop-in PL filter to the
lens body so that the ▲ is pointing to the
front.
• Push the filter in until it clicks.
16
① Remove the SCF-43 clear filter from the filter holder
and attach the ND4-43 or ND8-43 to the filter
holder.
• The DPF-43 drop-in PL filter should not be used
with the filter holder.
② Insert the filter holder in the lens's mounting
section.
③ Firmly push the filter holder in until it clicks.
• After mounting the filter holder, make sure that it
does not come off.
■Notes:
If the filter holder is improperly mounted, it may
come off. In this case, the unit's dust and drip re-
sistance may be compromised.
④ When detaching the filter holder, push and hold
the detach button and pull out the filter holder.
② Rotate the rotary lever to adjust the level
of surface reflection elimination.

Focus Limit Switch

This switch limits the autofocus range to speed up focusing in each
∞
-2.4m
range.
∞
-6m 6-2.4m
Select the optimum mode according to the shooting distance.
Close-up shooting : Autofocus is performed between 6 meters and
Normal shooting
Distant shooting

Focus Stop Buttons

• By holding down one of the focus stop buttons, you can deactivate
autofocus operation and fix focus at the point where the button
was pressed.
• Four buttons are provided. All have the same effect.

Shooting Cautions

• Be sure to attach the hood when shooting against the light.
• When two or more filters are used or a thick filter is used, part of the picture may be cut off or
obscured.

Attaching Lens Cap LC-140

2.4 meters.
: Autofocus is performed from ∞ (infinity) to
2.4 meters.
: Autofocus is performed from ∞ (infinity) to
6 meters.
17