MTD 19A30003OEM Manual Del Operador página 15

Installing the Upper Chute Tube
1. Peel the backing off of the self-adhesive foam strip (721-
04388) that has been included within your Contents of
Carton. Apply it to the upper chute, flush against the flange
as shown in Figure 4-24.
Flange
Figure 4-24
2. With the grass catcher cover open, install the upper
discharge chute through the discharge chute opening, as
shown in Figure 4-25.
Figure 4-25
3. With the ability now to wiggle the discharge chute tube
back and forth, slide it over the chute elbow mounted on
the cutting deck, as shown in Figure 4-26.
Figure 4-26
4. Continue to work the discharge chute down over the chute
elbow until the groove on the discharge chute aligns with
the upper chute support, as shown in the inset of Figure
4-27.
Figure 4-27
5. Close the grass catcher cover.
S
ection
4 — A & i
SSembly nStAllAtion
15