illy Francis Francis X1 Manual De Instrucciones página 41

7
flashing - RED
- Press down the coffee switch
descaling cycle.
- At the end of the cycle the machine will emit a beep and the LED will flash (GREEN)
- Remove the tank and clean it thoroughly; fill it with 1 liter of fresh water (up to the MAX level)
out the collection container and place it once again beneath the brew group
7
- Press down the coffee switch
- After around 5 minutes the LEDs will light up steadily (RED and BLuE)
beep.
- Remove the water collection container from beneath the brew group and wash it thoroughly.
- Now the machine is ready for use.
WARNING:
- Should a main power failure occur during the descaling procedure, it will be necessary to repeat the cycle from the start.
- If descaling is not performed as needed, scale build-up may cause malfunctioning not covered by the warranty. It is advisable to
use the descaling agent supplied with the machine 3.
- Do not use vinegar, lye, salt or formic acid because they may damage the machine.
The descaling solution must be disposed of in accordance with the applicable laws and regulations.
8
flashing - GREEN
7
; only one LED (RED) will flash to signal the beginning of a 20-minute
; only one LED (RED) will flash.
9
8
.
9
; empty
10
.
11
and the machine will emit a
EN
10
1 LITER
11
Steadily lit
37