Panasonic ER-GB42 Instrucciones De Funcionamiento página 14

4. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
5. Apply the oil to the blade after
drying.
6. Attach the comb attachment and
blade to the trimmer.
Cleaning with a brush
1. Remove the trimmer from the AC adaptor.
Make sure that the trimmer is turned off.
2. Remove the comb attachment and blade.
3. Brush off any hair trimmings from
the main body and from around the
blade.
4. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
5. Apply the oil to the blade.
6. Attach the comb attachment and blade to the trimmer.
14
中南美向.indb 14
Lubrication
Apply the oil to the trimmer before
and after each use.
Apply a drop of oil to each point
indicated by the arrows.
Removing the blade
Hold the main body, place your
thumb against the blades, and then
push them away from the main
body.
Remounting the blade
Fit the mounting hook into the blade mounting on the trimmer,
and then push in until you hear a click.
17/4/6 下午5:45