Tabla de contenido
1
OPEN THE COVERS.
3
REMOVE THE CROSSBAR INFILL.
Remove the infill from the underside
of the crossbar and set it aside.
4
SLIDE THE TOWERS ONTO THE CROSSBAR.
Slide the towers into the bottom channel of the
crossbars, making sure the insert is properly seated.
5
INSERT THE PLATES.
Clean your tonneau rails and
their t-slots, then insert 4
A-plates into the track on each
side of your tonneau cover.
Instruction #1036022A-Page 2 of 10
2
ADJUST THE HEIGHT OF THE INSERT.
Use the torque wrench to adjust the height of
the insert to be level with the adapter as shown.
4X
4X
2X
4X
8X
Tabla de contenido
