Special Settings; Terms Of The Guarantee - Novoferm Novomatic 423 Accu Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

• Special settings

In order to access the menus for the special settings,
keep key
pressed for 3 sec until figure 3 is
displayed. Press key
to by-pass menu step 3.
Now keep key
pressed for 3 sec until figure 5 is
displayed. Press key
to by-pass menu steps.
Menu stage 5: The opening force limit
After approx. 2 seconds, the display flashes showing
the set value of the opening force limit. The factory
setting is 4!
The force limit
setting can be increased for
decreased via buttons
and
value, press button
. The display shows "6".
Menu stage 6: The closing force limit
After approx. 2 seconds, the display starts flashing,
and the set value for the closing force limit is
displayed. The factory setting is 4!
The force limit setting can be increased or decreased
via buttons
and
. After setting the value, press
button
. "7" appears in the display.
Finally, check the force settings, and, if necessary,
repeat the setting procedure.
We expressly state that when changes
are made in special menu 6, compliance
with the permitted forces must be stated
by measurement with approved device in
accordance with En12455.
If the force setting is too high, persons may be placed
at risk of injury.
Menu stage 7: Light phases
Keep button
pressed until "7" appears in the
display.
Menu value
Light phase
_____________________
0
30 s
1
60 s
2
90 s
The factory setting is 0!
Dear customer,
The product you have purchased has undergone
extensive testing throughout its manufacture to
ensure that it meets high standards in terms of both
quality and functionality.
If during the guarantee period the product becomes
unusable in whole or in part due to material or
manufacturing defects, we undertake, at our
discretion, to rectify the defects by repairing or
replacing the faulty product free of charge or granting
a reasonable price reduction.
This undertaking does not cover defects occurring as
a result of
- incorrect installation or connection
- faulty putting into service and operation
- improper or non-designated use or
maintenance
- repair by non-qualified persons
- normal wear and tear or
Retain these installation, operating and maintenance instructions for the full duration of the operator's service life!
Menu stage 8: Door fitting
Press button
Menu value
________________________________
0
1
2
The factory setting is 0!
Menu stage 9: Battery type
Press button
charge control for the battery type used is set in this
menu.
. After setting the
Menu value
________________________________________
0
1
2
3
Types 2 and 4 are already reserved but not yet
released. The factory setting is 0!

Terms of the Guarantee

unauthorized modifications
- use of non-original components or removal of the
data plate
- mechanical damage (due to being dropped or
having sustained a serious impact)
- Acts of God und exceptional environmental
conditions (lightening strike, flooding etc.)
- negligent or wanton destruction
The guarantee does not cover components that are
subject to wear and tear or items that require
frequent replacement (e.g. light bulbs, batteries,
fuses).
Prerequisites for claiming under the guarantee
This guarantee is granted in addition to the sales
contract concluded with your dealer and does not
affect your statutory rights arising out of that sales
a lack of
contract.
The guarantee only covers defects occurring in the
product that forms the subject of the contract. We
. "8" appears in the display.
Closing speed
100%
90%
80%
. "9" appears in the display. The
Battery type
Panasonic LC-CA1215P1
Type 2
Type 3
Type 4
shall not assume responsibility for follow-up costs
resulting from installation and dismantling, checking
of parts, freight costs and postal charges nor for
claims for compensation and lost profit.
At our request the parts involved shall be returned to
us free of charge and in the case of replacement
automatically become our property.
We grant the following guarantee:
5 years on the control unit's electronic components
2 years on remote controls and accessories
The guarantee comes into force on the day of
delivery. In order to claim under the guarantee, you
must furnish proof of purchase. Making a claim
under the guarantee does not extend the guarantee
period.
Repaired or replaced parts are guaranteed for 6
months, however, at least for the original guarantee
period.
GB
Tabla de contenido
loading

Tabla de contenido