Care And Cleaning - Hamilton Beach 46381 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Care and Cleaning

w WARNING
Shock Hazard.
Do not immerse cord, plug, or coffee maker in any liquid.
All coffee makers should be cleaned at least once a month (once a
week for areas with hard water).
1. Unplug. (This resets brew counter for cleaning mode notification.)
2. Wipe coffee maker with a damp cloth or sponge. Dry.
3. Remove water filter and water filter base (see "How to Replace
the Water Filter").
4. Pour a minimum of 1 pint (2 cups/473 ml) white vinegar into
water reservoir.
5. Press the I/
(ON/OFF) button once. After 30 seconds, turn OFF.
Wait 30 minutes to allow vinegar to clean. Then turn ON again.
When brew cycle is finished, wait for unit to cool.
6. Empty carafe and rinse. Run 2–3 more brew cycles with CLEAN
WATER only. Allow to cool between cycles.
7. Wash in warm, soapy water. Rinse and dry. The carafe and filter
basket are dishwasher-safe to wash and dry in the TOP RACK
only.
Clean Notification
If unit is always plugged in, after 30 cycles CLEAN will scroll across
the display. Follow the directions for "Care and Cleaning."
NOTES:
• Performing the cleaning procedure will clear the display.
• The brew cycle counter resets every time the coffee maker is
unplugged.
If you do not want to perform the cleaning procedure, press the I/
(ON/OFF) button two times to clear the display.
6
How to Replace
the Water Filter
1. Soak filter pod for 15 minutes in water.
2. Add pod to bottom of water filter and
snap on filter handle.
3. Place assembly into right side of water
reservoir.
For better-tasting coffee, use a water filter.
Filter replacement is recommended every
30 cycles.
(optional)
15 min.
Tabla de contenido
loading

Tabla de contenido