Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet from
the pedals until the pedals have stopped completely. You can
stop the flywheel at anytime by pushing down on Tension Knob
(No. 48).
ADJUSTING THE HANDLEBAR
Loosen the [handlebar adjustment] Adjustment Knob (No. 16)
to raise or lower the handlebar to the desired position. Make
sure the Adjustment Knob (No. 16) settles into the desired
hole and secure it firmly by turning clockwise.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snuggly in the toe clip cage. Rotate one foot to within
arm's reach and pull the strap until the top clip cage fits your
shoe snuggly. Insert the strap back into the hoop of the toe clip.
Repeat this for the other foot.
MOVING THE BIKE
To move the bike, first ensure that the handlebar is properly
secured. If the handlebar is loose, tighten the Knob to secure
it. Next, stand at the front of the bike so that you're directly in
front of the handlebar. Firmly grasp and hold each side of the
handlebar, place one foot on the front stabilizer and tilt the bike
towards you until the transportation wheels on the front
stabilizer touch the ground. With the wheels on the ground, you
can transport the bike to the desired location with ease.
13
Tabla de contenido
