Product Description; Analog Integration - Mettler Toledo InPro 6000 Serie Manual De Instrucciones

en
22
a
Warning: Before dismantling the sensor or com-
mencing any maintenance work on it, ensure that the
equipment in which the sensor is installed is in a safe
condition (pressurize, no explosion risk, empty, rinse,
vent, etc.).
3

Product description

The sensors are delivered fully assembled, factory
tested and calibrated for correct function. A quali-
ty certificate and an inspection certificate 3.1 acc.
EN10204.3/1B is provided.
Drawings of the sensors see Appendix A.
The sensors are installed by using a VP-Cable
(InPro 6860 i) or a 5 pin cable (InPro 6970 i /
InPro 6960 i). Cables in different lengths 2 – 50 m are
available from METTLER TOLEDO.
Notice: Cable assignment can be found in the
h
METTLER TOLEDO cable installation manual.
3.1

Analog integration

Integration without transmitter (InPro 6860 i nA /
InPro 6860 i mA):
For analog integration two versions of the InPro 6860 i
exist.
– T he simulated nA signal is used for legacy biocon-
troller integration
– T he 4 / 20 mA-output incl. HART signal is used to
integrate the sensor directly into a process logistic
controller (PLC).
RS485 cable for
InPro 6870 i / InPro 6960 i / InPro 6870 i
Color
brown 24 VDC+ 1
black 24 VDC– 2
gray
yellow shield
blue
white
VP8 cable InPro 6860 i / nA
Color
gray
blue
pink
brown RS485–
green/
yellow shield
InPro 6000 Optical O
30 313 394
M400
Function TB4
shield 6
6
RS485– 7
RS485+ 8
M400
Function TB4
24 VDC+ 1
24 VDC– 2
RS485+ 8
7
4
Sensors
2
InPro 6000 Optical O
M800 M800
1/2 channel 4 channel
TB2 TB2 or
TB4
9 9
10 10
12 12
15 15
13 13
14 14
M800 M800
1/2 channel 4 channel
TB2 TB2 or
TB4
9 9
10 10
14 14
13 13
12 12
© 03 / 16 Mettler-Toledo GmbH
Printed in Switzerland
Sensors
2
M400
2w/FF/PA
TB2
n.c
n.c.
M
n.c.
N
O
M400
2w/FF/PA
TB2
n.c
n.c.
O
N
M