Cash Acme TANK BOOSTER HEATGUARD 020 Serie Manual Del Usuario página 12

3. Place a strainer seal in one end of the flex hose (bulge side towards flex
hose) and connect this end of the flex hose to the mixing valve cold inlet.
Connect the other end of the flex hose to the tee-piece.

If your kit comes with the stainless steel corrugated hose, place the in-
cluded washer between the cold inlet supply to the tee-piece inlet and
the hose.*
TANK BOOSTER
Installation Instructions
IS279 REV L
2-17-16 12