Installation - Femi 785xl Instrucciones Para El Uso Y Manutencion

9 Bar stop
10 Clamp (vice) (*)
11 Morsa
12 Clamp drive
13 Base
14 Carrying handle on the front (**)
15 Rear roll-bar (**)
16 Feet (**)
(*) BENCHTOP BAND SAW
(**) WHEEL-MOUNTED BAND SAW
BENCHTOP BAND SAW
WEIGHT ................................................................... 38 Kg.
SIZE .................................cm 108 x 75 x H80 in maximum
..............................................................overall dimensions.
PACKAGING SIZE .............................. cm 100 x 39 x H57
WHEEL-MOUNTED BAND SAW
WEIGHT ................................................................... 59 Kg.
SIZE ...............................cm 108 x 40 x H105 in maximum
..............................................................overall dimensions.
PACKAGING SIZE .............................. cm 50 x 130 x H70
2

INSTALLATION

2.1 REMOVING THE PACKING
Remove the wooden frame which protects the machine
during transit.
Try not to damage the frame as you may have to move the
machine long distances or store it for long periods.
2.2 HANDLING AND TRANSPORT (Fig. 2-3)
Before moving the machine from one place to another by
lifting it, apply the two handles 3 attached to the base.
Take the handles and fi x them with the screws and the nuts
on both sides of the base of machine.
Owing to the weight of the machine (kg 38), it must be
lifted by two persons standing on either side, and gripping
handles 3 (Fig. 2).
ATTENTION: To shift the machine, always lower
the band saw body all the way down and secure
it in this position.
Should the machine be fi xed on a base plate (column) unlock
the screws fi rst.
For trasport the machine, it is better to place in the box it was
when purchased. Ensure it is placed in the correct position
indicated by the arrows on the packaging.
Pay careful attention to the ideogram printed on the box as
they provide all necessary information for palletization and
stacking af boxes.
Tying the load down with ropes or safety belts is raccomended
during trasportation to prevent the load from sliding or
falling.
WHEEL-MOUNTED BAND SAW
The machine can be transported by a single person by means
of the two front wheels and grip 3 (Fig. 2).
In case of differences in level that cannot be overcome
because of the wheels, the machine must be lifted by at least
two persons, using front grip 3 and roll bar 14 (Fig. 3).
ATTENTION: To shift the machine, always lower
the band saw body all the way down and secure
it in this position.
For trasport the machine, it is better to place in the box it was
when purchased. Ensure it is placed in the correct position
indicated by the arrows on the packaging.
Pay careful attention to the ideogram printed on the box as
they provide all necessary information for palletization and
stacking af boxes.
Tying the load down with ropes or safety belts is raccomended
during trasportation to prevent the load from sliding or
falling.
2.3 POSITION/WORK STATION (Fig.3)
BENCHTOP BAND SAW
Place the machine on a suffi ciently fl at workbench so that the
machine has the better possible stability. Should you wish
to fi x the machine in place, use the special holes located
on the base.
In respect of ergonomic criteria during cutting operations,
the workbench must be positioned at such a height that
the clamp level is between 90 and 95 cm from the ground
(see Fig. 3).
ATTENTION: Make sure that the machine is placed
in a working area with suitable environmental
conditions and lighting. The general conditions
of the working environment are of fundamental
importance for accident prevention.
WHEEL-MOUNTED BAND SAW
To proceed with operations, position the machine on level,
fi rm ground, so that it rests on four feet 16 and is as stable
as possible. If it is to be fi xed to a work bench use the holes
provided for the purpose on the base.
ATTENTION: Make sure that the machine is placed
in a working area with suitable environmental
conditions and lighting. The general conditions
of the working environment are of fundamental
importance for accident prevention.
11