Troubleshooting
TROUBLE
PROBABLE CAUSE
Excessive noise
5. Worn bearings
(knocking)
Continued
6. Piston hitting the valve
plate
7. Noisy check valve
Oil in the discharge
1. Worn piston rings
air
2. Compressor air intake
restricted
3. Restricted breather
4. Excessive oil in compres-
sor
5. Wrong oil viscosity
6. Connecting rod out of
alignment
REMEDY
5. Replace worn bearings
and change oil
6. Remove the compressor
head and valve plate and
inspect for carbon deposits
or other foreign matter on
top of piston. Replace head
and valve plate using new
gasket
7. Replace
1. Replace with new rings
2. Clean filter. Check for other
restrictions in the intake
system
3. Clean and check breather
for free operation
4. Drain down to full level
5. Use SAE 30 (ISO 100)
non-detergent compressor
oil
6. Replace rod
18
Étiquettes d'avertissement
Trouver et lire toutes les étiquettes
d'avertissement qui se trouvent sur le
compresseur d'air indiquées plus bas
Fr7
DK724100AV 10
Capítulos
