System Setup - LEGRAND 430 531 Manual Del Usario

System setup

OSD (On Screen Display) Main Menu Description
Main Menu Display
MAIN MANU VER.XXXX
EXPOSURE
BLC
DAY/NIGHT
WHITE BALANCE
PRIVACY MASK
EFFECT
DISPLAY
COMMUNICATION
DEFAULT
EXIT
Main Menu setup
- In order to display the setup menu on the screen, set the menu command
or press the button panel.
 
- Use / control buttons to select each item.
 
- Use (-) / (+) control buttons to change the data.
- Use MENU control button to ENTER/ EXIT the menu display.
Sub Menu Description
Exposure setup
LENS TYPE
BRIGHTNESS
AGC MODE
AGC MAX
AGC ADJ
FLICKERLESS
SHUTTER SPD
DEFAULT
RETURN
Note:
1. Lens type can be switched to DC/ VIDEO or MANUAL.
When the system is set to DC/ VIDEO, please put the switch
(situated on the back of the camera) in "DC" or "VIDEO" position respectively
according to the type of the lens used (Different lens types used
will influence the image brightness, please adjust according to actual condition.).
2. Brightness setup range: 0~36.
3. AGC MODE: AUTO/ MANUAL selectable.
(1) AGC MAX: Set AGC MODE to AUTO (AGC MAX setup range = 0~255).
When AGC MAX < 100 is setup, AE function of
Day/ Night Mode becomes an ineffective function
(data value "---" for D/N Mode will be shown on the display).
Set to MANUAL, AGC MAX becomes an NA
(Not Available) item.
(2) AGC ADJ: Set AGC MODE to AUTO, AGC ADJ becomes an NA
(Not Available) item.
(3) AGC MODE: Set to MANUAL, AGC ADJ can be set to fixed GAIN
value (0~255).
4. SHUTTER SPD mode (NTSC: 1/100 and PAL: 1/120) is fixed, when
FLICKERLESS mode is set to "ON".
5. Nine types of SHUTTER SPD Mode: AUTO, NORMAL
(PAL: 1/50), 1/250,1/500, 1/1000, 1/2000, 1/4000, 1/10000, and 1/100000.
6. AGC MODE auto switches to manual, when SHUTTER SPD is set to 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/100000 or FLICKERLESS
(set to "ON").
7. DEFAULT: Return to the factory-default configuration.
8. RETURN: Return to previous page.
BLC Setup
BLC MODE
BLC LEVEL
BLC AREA
DEFAULT
RETURN
Note:
1. BLC MODE: BLC MODE can be set to "ON/ OFF".
2. BLC LEVEL (1~15): The higher the value, the higher the backlight compensation
level.
3. Seven Types of BLC AREA Mode:
(1) CENTER (2) TOPS (3) TOPL (4) BOTTOMS
(5) BOTTOML (6) LEFT (7) RIGHT
<-->
<-->
<-->
<-->
<-->
<-->
<-->
<-->
ON
<-->
EXPOSURE
DC/VIDEO
30
AUTO
100
NA
OFF
NORMAL
ON
<-->
BLC
OFF
15
CENTER
ON
<-->
(1) CENTER (2) TOPS
(5) BOTTOML (6) LEFT
Day / night Setup :
D/N MODE
DAY -> NIGHT
NIGHT -> DAY
SENSOR LEVEL
FILTER DELAY
DEFAULT
RETURN
AE VALUE
SENSOR VALUE
Note:
1. D/N MODE: Four types of setup (AE*/ SENSOR/ DAY/ NIGHT).
(1) AE: Setup according to DAY->NIGHT and NIGHT->DAY (threshold value),
auto switches to Color or B/ W. When AGC MAX < 100 is setup, AE function of
Day/
Night Mode becomes an ineffective function (data value "---" for D/N Mode will
be shown on the display).
(2) SENSOR: Auto switches to Color or B/ W according to SENSOR LEVEL
and FILTER DELAY setup.
(3) DAY: Fixed to Color mode.
(4) NIGHT: Fixed to B/ W mode.
2. DAY->NIGHT: The threshold value of color change (from color to B/ W) under
AE mode. Switches to B/W when "Day->Night"  "AE Value".
3. NIGHT->DAY: The threshold value of color change (from B/ W to color) under
AE mode. Switches to Color when "Night->Day"  "AE Value".
4. SENSOR LEVEL
(1) Higher the value: When the environment illumination is insufficient the
process of switching to B/ W will be delayed.
(2) Lower the value: When the environment illumination is insufficient advanced
switching process from Color to B/ W will quickened.
5. FILTER DELAY: The delay time of the system switching from color to B&W
mode when environment illumination change occurs
(Filter Delay Time: 0~15 Sec.).
6. When D/N MODE is set to "AE/ DAY/ NIGHT" mode, SENSOR LEVEL and
FILTER DELAY become an NA (Not Available) item.
7. AE VALUE: When D/ N is set to AE, it will reflect the illumination degree of the
current scene.
8. SENSOR VALUE: When D/ N is set to SENSOR, it will reflect the illumination
degree of the current scene.
White balance setup :
WHITE BALANCE
WB MODE
RED GAIN
BLUE GAIN
PUSH AUTO
DEFAULT
RETURN
Note:
1. Five Types of WB MODE: AUTO, INDOOR, OUTDOOR, MANUAL,
and PUSH AUTO.
2. RED GAIN/ BLUE GAIN operates only when WB MODE is set to MANUAL, otherwise it is
an NA (Not Available) item.
3. When WB MODE is set to PUSH AUTO:
- PUSH AUTO ON: Enable auto tracing white balance.
- PUSH AUTO OFF: Disable auto tracing white balance.
(3) TOPL (4) BOTTOMS
(6) RIGHT
DAY / NIGHT
AE
50
200
NA
NA
ON
<-->
??
??
AUTO
NA
NA
NA
ON
<-->