Emerson HF1160BQ02 Manual Del Usuario página 12

BP7272-4 HF1160.qxp_BP7272 9/10/15 9:44 PM Page 12
5. How to Wire Your Ceiling Fan
5.5
Screw the two 3/4" threaded studs (supplied) into the
tapped holes in the hanger bracket (Figure 19).
5.6
Lift the ceiling cover up to the threaded studs and turn until
studs protrude through the holes in the ceiling cover
(Figure 20).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied) (Figure 20).
Tighten the knurled knobs securely until the ceiling cover
fits snugly against the ceiling.
Your fan is now wired to be turned on and off from the wall
switch.
To avoid possible fire or shock, make sure that the electrical
wires are completely inside the outlet box and not pinched
between the ceiling cover and the ceiling.
WARNING
!
(Continued)
THREADED
STUDS (2)
Figure 19
SAFETY CABLE
THREADED
STUDS (2)
#8 LOCKWASHERS (2)
KNURLED KNOBS (2)
Figure 20
12
CEILING
COVER
U.L. Model No.: HF1160-2