Tabla de contenido
Idiomas disponibles
Idiomas disponibles
After cooking salty preparations, the cooking plate must be cleaned promptly (otherwise
the salt will corrode the plate). Do not use chlorinated products as these may also cause
corrosion.
FRAME
The stainless steel frame should be cleaned with a slightly moist sponge.
COOKING WASTE COLLECTOR
This collects the cooking waste. It must be handled once the appliance is cool, and then
emptied and cleaned before the next use.
BURNER(S)
Periodically check the condition of the flame holes on the burners and the air collar(s),
which may become obstructed by insect nests, cobwebs or dirt.
If the flame holes are clogged, brush the branches with a hard bristle brush. To clean the
air collar(s), we do NOT recommend using metal objects, as they are likely to alter the
technical specifications of the burner(s).
We therefore recommend that you blow into the air collar. The burner and air collar may
be accessed by removing the appliance's metal plate (see figures 2 and 3 p 66-67).
ELECTRONIC IGNITION
It is supplied with a LR6 battery (1.5 Volts). To change the battery, refer to the diagram
below.
Unscrew the
push button
LR6 1.5 volt battery
GGCIR2
GGCIO2
Packaging must be discarded in line with current regulations
- 31 -
Tabla de contenido
