Troubleshooting - ELICA EGS436SS Guía De Instalación, Uso Y Mantenimiento

TROUBLESHOOTING

Issue
too noisy
False contact in the
connectors
the lamp does not
work
Potential Causes
Electronic Control does not
correclty
Non functional lamp
During the hood cleaning, the
motor connector has been loose
and a false contact in the main
harness is performed.
Electronic Control does not
During the hood cleaning, the
motor connector has been loose
and a false contact in the main
harness is performed.
Filters are dirty
During the hood cleaning, the
motor connector has been loose
and a false contact in the main
harness is performed.
Recommended Actions
Yes, Proceed with the following diagnostic sequence
No, Replace the control and user interface.
not burned and be in correct place.
to the connector mounted in the plastic verifying that the locking
system in the connectors is well locked.
connectors is well attached.
Yes, Proceed with the following diagnostic sequence
No, Replace the control and user interface.
to the connector mounted in the plastic and that the locking system in
the connectors is well locked.
connectors is well attached.
to the connector mounted in the plastic and that the locking system in
the connectors is well locked.
connectors is well attached.
to the connector mounted in the plastic and that the locking system in
the connectors is well locked.
connectors is well attached.
14