Programming Track Numbers - Philips AZ1203 Manual De Instrucciones

Programming track numbers

You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH ∞ or §.
2 As soon as the number of the desired track is displayed, press
the PROGRAM button to store the track in the memory.
™
appears in the display and the number of the
PROGRAM
stored track is shown. Then P ro g lights up briefly.
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
™ The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks the display shows FULL.
If you press PROGRAM and there is no track selected, the display
shows no SEL.
Playing the program
If you have selected the tracks in the stop position, press
PLAY·PAUSE 2;.
If you have selected the tracks during CD play, first press STOP 9,
then press PLAY·PAUSE 2;.
Erasing the program when CD playback is stopped
From the stop position, press STOP 9.
™ no P ro g lights up briefly,
program is erased.
Note: The program will also be erased if you
– interrupt the power supply,
– open the CD compartment, or
– move the POWER slider to TUNER or TAPE .
disappears and your
PROGRAM
CD PLAYER
PROGRAM
CD
PROGRAM
CD
CD
PROGRAM
CD
CD
11