Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
Parameter
MAC Filtering
Filter Mode
Filter List
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
3.2.10 Status Setup
Parameter
Ethernet
Wireless
Description
You can enable or disable the MAC Filtering
function.
If you select "Only deny PCs with MAC listed
below to access this device", then all the PCs
in the list will be denied to access and all other
PCs will be allowed to access. If you select
"Only allow PCs with MAC listed below to
access this device", then all PCs in the list will
be allowed to access but all other PCs will be
denied to access.
Enter the MAC address of PC that will be
managed by the MAC Filtering rule.
Description
It shows the default IP address, Subnet Mask,
Gateway and Link status information.
It shows the current Wireless information. (Not
available in 'AP Mode')
Tabla de contenido
