CHIEF iCMPTM1T Instrucciones De Instalación página 14

iCMPTM1T
4
X2
2
(D) X2
3
14
1 (A, B) X2
C
4
INSTALL DISPLAY TO WALL PLATE
WARNING:
Exceeding the weight capacity can
result in serious personal injury or damage to
equipment! It is the installer's responsibility to make
sure the combined weight of all components
attached to the iCMPTM1 does not exceed 100 lbs
(45 kg).
WARNING:
Display may be very heavy! Ensure
display can be safely lifted and maneuvered as
required to install on wall plate. Failure to take
adequate precautions can result in serious personal
injury or damage to equipment!
1. Hang display with brackets (A and B) on upper rail
of wall plate (C). Center display on rail.
2. Close both left and right display latches.
3. Using Phillips screwdriver, install screws (D) into
left and right side display latches.
4. OPTIONAL: Install padlock (not included) in the left
and/or right side display latches (upper or lower
holes).
Installation Instructions