Tripp-Lite SmartOnline Manual Del Usuario página 6

Installation
Optional Connections
2 USB and RS-232 Serial
Communications (all models)
Use the included USB cable (see
DB9 serial cable (see
communication port of your computer to the
communication port of your UPS. Install on
your computer the Tripp Lite PowerAlert
Software appropriate to your computer's
operating system. Your UPS may feature
additional communications ports; these ports
may be connected to additional computers that
have PowerAlert Software installed. Consult
your PowerAlert manual for more information.
EPO Port Connection (all models)
3
This optional feature is only for those
applications that require connection to a
facility's Emergency Power Off (EPO) circuit.
When the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter. Using the cable provided, connect the
EPO port of your UPS (see
supplied normally closed or normally open
switch according to the circuit diagram (see
3b
). The EPO port is not a phone line surge
suppressor; do not connect a phone line to
this port.
4 External Battery Connection
(select models)
Check to ensure that the external batteries you
are connecting match the voltage listed on
your UPS's battery connector. All UPS models
come with a robust internal battery system;
select models feature connectors that accept
optional external battery packs (sold separately
from Tripp Lite) to provide additional runtime.
Adding external batteries will increase
recharge time as well as runtime. See the
battery pack owner's manual for complete
installation instructions. Make sure cables are
fully inserted into their connectors. Small
sparks may result during battery connection;
this is normal. Do not connect or disconnect
battery packs when the UPS is running on
battery power.
(continued)
(continued)
2a
) and/or
2b
) to connect the
3a
) to a user-
2a
Your model may differ.
2b
Your model may differ.
3a
Your model may differ.
3b
4 Your model may differ.
6
4-5
48V/26A