8
Set up your device
Set up your device
Insert the SIM card and battery
Always switch the device off and disconnect the charger
before removing the battery.
Important: To prevent damage to the SIM card, always
remove the battery before you insert or remove the card.
1
To prevent the battery from coming loose, place the
device so that the back cover is facing up.
2
Place your finger in the grip, and lift the back cover up.
You do not need to press a button to release the back
cover.
3
To release the SIM card holder, slide the holder to the
right (1), and lift the left end of the holder up (2). Make
sure that the beveled corner on the card is facing up, and
that the contact area on the card is facing the connectors
on the device (3). Close the holder (4), and slide it to the
left to lock it into place (5).
4
Align the battery contacts to the corresponding
connectors of the battery compartment, and insert the
battery in the direction of the arrow.
5
To replace the back cover, direct the top locking hooks
toward their slots first and then press down until the
cover locks into place.