Maintenance And Care; Spare Parts And Accessories - Flex RE 16-5 115 Instrucciones De Funcionamiento Originales

Using with guide cowl
 Bring the guide cowl fully into contact with
the work surface.
 Sweep the concrete planer with
overlapping movements.
 One side of the guide cowl is flattened to
allow sanding in corners.
NOTE
Check at regular intervals that the planing
wheels turn about their axes. Tap to remove
any dust deposits as and when necessary.
After stopping work
 Switch off the power tool after stopping
work and pull out the mains plug.
 Switch off the dust extractor.
 Clean the power tool.

Maintenance and care

WARNING!
Before performing any work on the power
tool, pull out the mains plug.
NOTE
Use only original parts supplied by the
manufacturer for replacement purposes. The
use of non-original parts will invalidate any
claims under the manufacturer's warranty.
26
Cleaning
WARNING!
Do not use water or liquid detergents.
 Regularly blow out the housing interior and
motor with dry compressed air.
 Clean the protective hood or guide cowl
with dry compressed air. Use a brush to
remove stubborn deposits.
Repairs
Repairs may only be carried out by an
authorised customer service centre.
NOTE
Do not loosen the screws on the motor
housing during the warranty period. Failure
to comply with this requirement will invalidate
any claims under the manufacturer's
warranty.
Changing the planing wheels on the
planing head
CAUTION!
Use only planing wheels of the same type.
For correct installation of the planing wheels,
refer to the installation instructions supplied
with the planing wheels.

Spare parts and accessories

Exploded drawings and spare part lists can be
found on our homepage:
www.flex-tools.com
RE 16-5 115