Audible Continuity - RS Pro RS-9963T Manual De Instrucciones

Digital Multimeter/ English
Frequency (Auto-ranging)
Range Resolution
9 Hz 0.001 Hz
99 Hz 0.01 Hz
999 Hz 0.1 Hz
9999 kHz 1 Hz
99 kHz 10 Hz
999 kHz 100 Hz
9 MHz 1 kHz
Sensitivity: >0.5V RMS while ≤1MHz
Sensitivity: >3V RMS while >1MHz
Input Protection:1000V dc or 1000V ac rms.
Frequency (Auto-ranging)
Range Resolution
0.1%~99.9% 0.1%
Pulse width: >100us, <100ms.
Frequency width: 5Hz–150kHz.
Sensitivity: <0.5V RMS.
Overload protection: 1000V dc or ac rms.
Frequency (Auto-ranging)
Range Resolution
-20°C ~400°C 0.1°C
400°C ~1000°C 1°C
-4°F ~752°F 0.1°F
752°F ~1832°F 1°F
Sensor: Type K Thermocouple.
Overload protection: 1000V dc or ac rms.
16
Accuracy
±1.2% of rdg ±3 digits
±1.5% of rdg ±4 digits
Accuracy
±1.2% of rdg ±2 digits
Accuracy
±3% of rdg ±5°C
±3% of rdg ±8°F
13/12/2017 Version No. 001
Diode Test
Test current Resolution
0.3mA typica 1 mV
Open circuit voltage: MAX. 2V dc
Overload protection: 1000V dc or ac rms.

12. Audible Continuity

Audible threshold: Less than 30 Test current MAX. 0.3mA
Overload protection: 1000V dc or ac rms.
Store capacitance 2000
Enclosure Double molded, waterproof
Shock (DropTest) 6.5 feet (2 meters)
Diode Test Test current of 0.9mA maximum, open circuit voltage 2V DC
typical
Continuity Check
Audible signalwill sound if the resistance is less than 30
(approx.), test current <0.3mA
Temperature Sensor Requires type K thermocouple
Input Impedance >10M VDC & >9M VAC
AC Response True rms
AC TrueRMS The term stands for "Root-Mean-Square" which represents
the method of calculation of the voltage or current value.
Average responding multimeters are calibrated to read
correctly only on sine waves and they will read inaccurately
on non-sine wave or distorted signals. True rms meters read
accurately on either type of signal.
ACVBandwidth 50Hz to 400Hz
CrestFactor ≤3 at full scale up to 500V, decreasing linearly to 1.5 at
1000V
Display 60 count backlit liquid crystal with bargraph
Over Range Indication "OL" is displayed
13/12/2017 Version No. 001
Digital Multimeter/ English
Accuracy
±10% of rdg ± 5 digits
17