Operation∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8; Control Panel - Royal Sovereign ARP-4009 Manual Del Propietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

operation
Tenperture control set

control panel

power control
The power control button turns the unit on and off. When you press the button, the unit begins to operate.
Mode control
The∙Mode∙Control∙has∙3∙settings∙(four∙settings∙on∙4012H).
cool Mode
Press the Mode Control button to select Cool mode. The green light will show on the display.
The unit displays "present room temperature." The temperature range settings are between 64~88 °F
A. In Cool mode, use the
or
button to adjust and set the desired temperature for the room. After 3 seconds the display will return back to the present room temperature.
note:∙The∙air∙exchange∙hoses∙must∙be∙vented∙through∙window∙kit∙when∙in∙this∙mode.∙
dry (dehumidify) Mode
Press∙the∙Mode∙Control∙button∙to∙select∙Dry∙(dehumidify)∙mode.∙∙The∙light∙will∙show∙on∙the∙display.
When the Dehumidify mode is on, the temperature buttons do not function. The fan speed can be adjusted only if the temperature in the room is higher then 77 ° F. If it is below this temperature, the
fan∙speed∙is∙automatically∙fixed∙to∙"low"∙and∙cannot∙be∙adjusted.∙∙∙∙When∙the∙humidity∙in∙the∙room∙is∙50%∙or∙lower,∙the∙compressor∙will∙not∙run∙and∙the∙unit∙will∙not∙dehumidify.∙∙∙∙
note: The∙exhaust∙hose∙must∙be∙connected∙to∙remove∙the∙humidity.
Fan Mode
Press the Mode Control button to select Fan mode. The light will show on the display. The air is circulated throughout the room with no cooling.
Heat Mode (only arp-4012H)
Press the Mode Control button to select Heat mode. The red light will show on the display.
The unit displays "present room temperature". Heating is only activated when the temperature in the room is below 81° F. The temperature setting can be adjusted between 64 and 81° F.
B. In Heat mode, use the
or
button to adjust and set the desired temperature for the room. After 3 seconds the display will return back to the current room temperature.
note:∙The∙two∙air∙exchange∙hoses∙must∙be∙vented∙through∙window∙kit∙when∙in∙this∙mode.
Timer set control
Oscillation mode
Fan speed control
Auto
Cool
Dehumidify
Fan / Heat
LCD display
Power control
Sleep mode
Mode control
8
Tabla de contenido
loading

Este manual también es adecuado para:

Arp-4010Arp-4012Arp-4012hAir-4012Air-4012h

Tabla de contenido