Assembly
Attention! The fitting must be installed, flushed and
tested after the valid norms!
Attention! The mixer can not used together with
a continuous flow water heater.
The hot and cold water supplys should be of equal
pressures.
The fittings must not be installed on washstands
with raised edge
Only the battery housing with battery or power pack
supplied by Hansgrohe may be connected to the
electrical connection cable of the fittings.
During initial start-up and after servicing, air in the
fittings can cause an unattractive jet pattern. The jet
pattern is okay again after switching the jet on and
off about 15 times.
Adjustment
This mixer has the following feature:
background fade-out with integrated range adjust-
ment, that means the mixer is automatically adjusted
on to the local conditions (washbasin, brightness,
reflection) by the sensory mechanism.
Battery operation
The indicator LED signals that the battery must be
changed.
Battery voltage ≤ approx. 5.5 V:
The indicator LED in the sensor window blinks when
the fitting is operated, water withdrawal continues
to be possible
Battery voltage ≤ approx. 5.3 V:
The indicator LED in the sensor window lights con-
tinuously, water withdrawal is no longer possible,
the battery must be replaced.
Attention! After insertion of the battery, the fitting
should not be activated for approx. 30 seconds.
This time is required for self-adjustment.
Power supply pack operation
If a mains voltage failure is detected while the fittings
are open, the fittings are closed automatically.
1
English
Technical Data
Operating pressure:
Recommended operating pressure: 0.1 - 0.4 MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Rate of flow:
Maximum flowing-out temperature
at 50 K temperature difference
and 0,3 MPa flow pressure:
Follow-on time:
Battery:
Spare parts (see page 4)
1
battery
2
connection hose
3
spray former Starck X
4
aerator Starck
5
fixing set
6
electronics cpl. Starck
electronics cpl. Starck X
7
AC adapter
8
battery box
9
non return valve
10 aerator Starck X
XXX = Colors
000 chrome plated
800 stainless steel optic
max. 0.4 MPa
1.6 MPa
max. 80 °C
65 °C
5 l/min 0.3 MPa
42 °C
1 - 2 s
CR-P2 / 6 V
Lithium
97399000
98809000
98867000
98989XXX
13961000
98799000
98849000
98800000
98801000
96456000
98610000