Foster Milano Air 7391245 Montaje Y Modo De Empleo página 103

FUNZIONAMENTO OPERATION EN I
The product is equipped with electronic sensors that react to touch.
F
irstly switch on the hob and then the desired cooking zone.
Switching on the hob
Press the power key for at least 2 seconds.
The entire display switches on. If no other command is given, the hob will switch off after a few
seconds for safety reasons.
Activation of the desired cooking zones
Touch the key relevant to the zone of interest.
The display shows 0, use + or – to select the desired power that ranges from 1 to P
P
Booster
: indicates the function and is present on each cooking zone. To activate it, you need
to use the + key until reaching power 9, and pressing the key again. This function will stay on for 5
minutes, after which the system will re-position itself on power 9.
You are advised to use this function to bring water more quickly to the boil.
Pot Detection
If suitable saucepans are not positioned or recognised in the various cooking zones, the pot detec-
tion function will indicate this lack with the symbol "u"
Then position a saucepan, of adequate diameter and materials, on the cooking zone, as indicated
in the adequate containers paragraph.
The cooking zone will automatically switch off after 10 minutes if no saucepan is recognised.
Switching off the hob and residual heat indication
Touch the power key.
The main switch indicator light and the indicator lights for the cooking zones switch off. The hob
H
is off. The residual heat indicator light displayed with on each cooking zone stays on until these
zones are not sufficiently cooled.
Attention risk of burns
Do not touch the cooking zone displaying this indication (H).
If a cooking zone stays on for too long at the same power level, the appliance will automatically
switch it off and the residual heat H indication appears.
Switch back on as usual to re-enable the Cooking zone function.
The following table outlines the maximum non-stop operating time for each power level:
103