Enlaces rápidos
Install Unique Trim Code.
For Best Performance. Every Time.
Unique trim code for required injectors must be uploaded to the
engine ECM for proper engine performance.
Delphi C7 , C13 and C15 injectors are supplied with a unique trim code developed during the
remanufacturing process. The trim code is a part of the injector. It is as important as the
o-rings, the nozzle or the plunger and ensures optimal engine performance by compensating
for variations in injector flow and timing.
These injectors should never be installed without installing the trim code. The trim code
is supplied on a CD in the box with the injector and should be uploaded to the ECM using
www.delphitrimcode.com.
Installing these injectors without the trim code can potentially create a number of problems:
• Low power
• Rough idle
• High power
• Emissions issues
10 Steps to Installing Trim Codes:
Follow the steps below to install the software, purchase a license
and protect your engine from future malfunctions.
1. Visit www.delphitrimcode.com to access links to download trim code software and purchase a license
2. Download the complete "How To" guide for detailed instructions.
3. Download the ECM Serial Number GrabIt program.
4. Connect your computer and NEXIQ™ USB Link box to the Vehicle Diagnostic Port.
5. Run the GrabIt program to obtain your ECM serial number.
6. Download the Trim Code Upload Software that is linked at the top of the page.
7. Purchase a license by following the link at the top of the page.
8. Again, connect your computer and NEXIQ™ USB Link box to the Vehicle Diagnostic Port, also ensuring you have a
good Internet connection.
9. Start the DelphiTrimLoader.exe file.
10. Follow the steps in the "How To" guide to either load trim code files or swap injectors between cylinders.
delphiautoparts.com
• Engine damage in severe cases
Delphi Product & Service Solutions | 1624 Meijer Drive, Troy, Michigan 48084 USA
Delphi Injector Trim Code
Tel: 1.800.521.4784
Delphi Injector Trim Code
©2017 Delphi Automotive Systems LLC. All rights reserved.
DPSS-16-E-142
Manuales relacionados para Delphi С7
Resumen de contenidos para Delphi С7
- Página 1 ECM for proper engine performance. Delphi C7 , C13 and C15 injectors are supplied with a unique trim code developed during the remanufacturing process. The trim code is a part of the injector. It is as important as the o-rings, the nozzle or the plunger and ensures optimal engine performance by compensating for variations in injector flow and timing.
- Página 2 Unique trim code for required injectors must be uploaded to the engine ECM for proper engine performance. Los inyectores Delphi C7, C13 y C15 vienen con un código de ajuste único que se ha desarrollado durante el proceso de refabricación. El código de ajuste forma parte esencial del inyector.