Hunter HEPAtech 30135 Manual De Instrucciones página 4

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4
Operating Your Air Purifier
On/Speed Control: Rotate the Speed Control knob to set the desired
speed. A setting of zero (0) indicates that the unit is off, one (1) is low speed,
two (2) is medium speed, and three (3) is high speed. The fan speed can be
adjusted at any time.
HEPAtech Filter Calendar: The HEPAtech Filter indicator is located at the
top of the calendar ring. To set the HEPAtech Filter counter, rotate the calendar
ring to align the month that you installed the filter with the top indicator. Since
the filter is designed for 6 months use, the two indicators will serve as reminders
to change the filter every 6 months.
Pre-filter Calendar: The inner knob of the filter counter is the pre-filter counter.
To use, align the knob with the month that you installed the pre-filter. The replace
symbol on the inner knob points to the month in which you should install a new
pre-filter. The pre-filter is designed for three months of usage.
Ionizer (30061 only): Press this button to turn 'on' the ionizer. When the
ionizer is 'on', the green light near the button will be illuminated.
Cleaning and Filter Replacement
1. Clean the outside of the unit with a soft, damp cloth. The front grill can be
removed and cleaned in soapy water. Remove the pre-filter before cleaning
the front grill.
2. At least every 90 days, replace the carbon pre-filter. This
is necessary to maintain proper odor removing and overall filtration
performance. If necessary, it can be changed more often. Mark the new
filter installation sticker included with the new carbon pre-filter. Be sure to
remove any plastic wrapping that may be on the new filter
before you place it in the Air Purifier.
3. While replacing the pre-filter, you should view the condition of the
HEPAtech
Filter. Compare the filter to the color coded chart that is on the
®
inside of the housing. If the filter matches the dark color on the chart, you
should remove the filter and replace it with a new filter. Mark the new filter
installation sticker included with the new HEPAtech
on use and environment, the HEPAtech
four to six months.
4. Gently pull on the filter to remove it from the unit. While removing the filter,
note the directional arrows printed on the top of the filter. The new filter will
be installed with the same orientation. Once removed, the used filter can be
discarded.
5. Remove the new filter from its wrapping and look at the directional arrows
printed on the side of the filter. Install the filter with arrows pointing towards
the unit. Press the filter firmly into the air purifier. To avoid damaging the
filter media, you should press on the frame of the filter only.
44080-01 08/19/2010
Filter. Depending
®
Filter should last
®
©2010 Hunter Fan Company
Tabla de contenido
loading

Este manual también es adecuado para:

Hepatech 30061

Tabla de contenido