General Information - FLO-DYNAMICS CCST 288 Manual Del Usuario

WARRANTY
This product is warranted against any defect in materials and/or construction for a period of 1
(one) year from the date of delivery. The warranty consists of free-of-charge replacement or
repair of defective component parts or parts considered defective by the Manufacturer.
Reference to the machine serial number must be included in any requests for spare parts.
This warranty does not cover defects arising from normal wear, incorrect or improper
installation, or phenomena not inherent to normal use and operation of the product.
The manufacturer guarantees the perfect suitability of the materials used for packing, in terms
both of composition and mechanical strength/resistance. The guarantee does not cover
breakdowns attributable to damage suffered during shipping or warehousing or caused by the
use of accessories not meeting manufacturer's specifications, or to tampering with or repair of
the product by unauthorized personnel. It is of utmost importance that the crates containing
the machine be carefully inspected, upon delivery, in the presence of the shipping agent. We
recommend performing inspection with extreme care, since damages to the crates due to
shocks or dropping are not always immediately visible thanks to the shock-absorbing capacity
of today's composite packing materials. The apparent integrity of the packing materials does
not exclude possible damage to the goods, despite the due care taken by the manufacturer in
packing them
NOTE: Regarding the above, the Manufacturer reminds the Customer that according to
international and national laws and regulations in force the goods are shipped at the sole risk of
the latter and, unless otherwise specified in the confirmation of order phase, the goods are
shipped uninsured. The Manufacturer therefore declines any and all responsibility in merit of
CLAIMS for damages due to shipping, loading and unloading, and unpacking.
The product for which repair under guarantee is requested must be shipped to the
manufacturer under the customer's exclusive responsibility and at the customer's exclusive
expense and risk. In order to avoid damage during shipping for repairs, the Manufacturer's
original packing must always be used.
The manufacturer declines any and all responsibility for damage to vehicles on which
recovery/recycling and recharging are performed if said damage is the result of unskilful
handling by the operator or of failure to observe the basic safety rules set forth in the instruction
manual. This warranty replaces and excludes any other warranty or guarantee that the seller is
required to provide under law or contract and defines all the customer's rights in regard of faults
and defects and/or scarce quality in the products as purchased.
The warranty will expire automatically at the end of the twelve-month period or whenever one
of the following occurs: failure to perform maintenance; use of improper maintenance
procedures; use of unsuitable lubricants and/or tracer fluids; inept or improper use; repairs
performed by unauthorized personnel and/or with non-original spare parts; damage caused by
shocks, fires, or other accidental events.

GENERAL INFORMATION

Machine identification information is printed on the data plate on the rear of the machine (see
Figures 1 and 2). Overall machine dimensions:
Height: 41.7 inch
Depth: 20.5 inch
Like any equipment with moving parts, the machine inevitably produces noise. The
construction system, paneling, and special provisions adopted by the Manufacturer are such
that during work the average noise level of the machine is less than of 70 dB (A).
INSTRUCTIONS MANUAL
Width: 19.7 inch
Weight:
-7-
200 lb