Maintenance; Components; Ordering Information; Spare Parts - HTL SWIFTPET Manual De Instrucciones

S S W W I I F F T T P P E E T T
The service life of the battery: approx. 1000 charging cycles, if used correctly. It is not possible
to overcharge the battery, if all instructions of the manufacturer are followed.
Note:
Charging shall not be interrupted. If the charging process is interrupted, the next
charging may take place after the battery has been completely discharged.

9 - MAINTENANCE

Cleaning
The SWIFTPET does not require any maintenance. The external parts of the pipetting aid
may be cleaned with a swab moistened with isopropyl alcohol.
The nosepiece and the pipette holder with the check valve may be autoclaved at 121 °C
for 20 minutes. The filters included in the set may be sterilised by autoclaving at 121 °C
for not more than 15 minutes.
Storage
The SWIFTPET shall be stored in a dry place. The allowable storage temperature: -20 °C
to +50 °C.
During breaks in the work the pipetting aid shall be placed in the wall hanger included with
the pipetting aid.
The pipetting hanger may be fitted on a wall on a hook or stuck with the adhesive tape
attached to the hanger. The surface for the hanger should be smooth, clean and
degreased. Before sticking the pipetting hanger remove the protective film from the tapes
attached to the hanger.
Note:
Do not store the pipetting aid with a filled pipette.

10 - COMPONENTS

The SWIFTPET set is supplied with the following components:
• Pipetting aid
• Charger
• Pipetting hanger
• Membranefilter 0.2 µm - 2 pcs
• Instruction manual
7

11 - ORDERING INFORMATION

The following versions of the SWIFTPET differ with the type of included charger, depending
on the mains voltage.
Versions Voltage
Continental Europe 220 V / 50 Hz
USA 120 V / 60 Hz
UK/Ireland 230 V / 50 Hz
Australia 240 V / 50 Hz

12 - SPARE PARTS

Item
Part name
in fig.1
F Nosepiece
G Pipette holder
H Membranefilter 0.2 µm
Membranefilter 0.45 µm
K Connector gasket
L Continental Europe 220 V / 50 Hz
Power USA 120 V / 60 Hz
supply: UK/Ireland 230 V / 50 Hz
Australia 240 V / 50 Hz
ENGLISH
Catalogue number
0301
0302
0303
0304
Number of
Catalogue no.
pieces in pack
9022 1
9021 1
9023 1
9024 1
9025 1
9015 1
9016 1
9017 1
9018 1
8