Purging Non-Condensable Gases; Language; Measure Units - MasterCool 69789 Instrucciones Para El Uso

Select Tank Charging and press F4 ↵.
The following screen will be displayed:
Set the quantity of refrigerant to be transferred to the machine bottle (the quantity must be between the limit values suggested by the machine) and
press F1 ▶ to confirm:
Press F1 ▶:
Press F1 ▶, the machine will now fill the machine bottle with the preset quantity. When the quantity minus 1 lb is reached, the machine will stop
and display:
Close the bottle tap and press F1 ▶ , the machine will stop automatically after having recovered the residual refrigerant from the hoses. Close the
high-pressure tap. Disconnect the external bottle. Switch the machine off.

PURGING NON-CONDENSABLE GASES

If 69789/69789-H should become loaded with excessive tank pressure due to the accumulation of NCG (Non-Condensable Gases) it will be
necessary that the operator purge the NCG manually. The operator will need to start the manual purge and the machine will automatically stop the
purge when the proper pressure is reached. The operator can also stop the purge manually before the machine determines the proper pressure.
26
Last Recovered Qty
■
Tank Charging
Air Purge

Language

Measure Units

Set Date & Time
▶
Tank Charging
Set amount: xx.x lb
■
Min=xx Max=xx lb
F1 to continue
F2: reset
▶
Tank Charging
Use the HP hose to connect external tank
■
and
Press F1 to continue
▶
Tank Charging
Open the external tank valve, open HP
■
valve and
Press F1 to continue
F2 to exit
▶
Tank Charging
Close external bottle tap
■
Press F1 to continue
F2 to exit
SETUP
↵
↓