Replacement Parts - Hamilton Beach Commercial Summit Serie Manual De Funcionamiento

A-840083400B-ENv01 11/30/01 3:57 PM Page 15
Maintenance
Inspect the blender and its various parts and replace as follows:
Daily Unplug the blender and remove the jar from the base, and then inspect the jar
and cutter assembly for wear, nicks, or broken blades. Replace if necessary.
See "Replacement Parts". If the cutter assembly blades are loose,
discontinue use immediately. Do not attempt to repair or tighten the cutter assembly.
Unplug the blender, and then inspect the power cord insulation and power plug
Weekly
for cracks. Inspect sealing gasket for cracking and leaking of fluids under unit.
Refer to "Requesting Assistance or Service" for repair or replacement.
Yearly Replace the jar and cutter assembly at least once a year or sooner if the cutter assembly
appears worn or damaged. See "Replacement Parts".
NOTE: Do not operate this blender if it malfunctions or is dropped or damaged in any manner.
Return blender to the nearest authorized service facility for examination, repair, or electrical or
mechanical adjustment.

Replacement Parts

Refer to "Requesting Assistance or Service" to order parts below.
Description . . .
32 oz.0.95 L Polycarbonate jar and cutter assembly
(includes cover/filler cap)
Quiet Shield™ sound enclosure
Caring for the Blender
Part Number . . .
6126-91515
QS916
15