Axis Camera Management - Multiple Products/Large Installations - Axis P7224 Guia De Instalacion

Page 10

AXIS Camera Management - multiple products/large installations

AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the AXIS P7224 is connected to the network and that power has been applied.
2. Start AXIS Camera Management.
3. When the AXIS P7224 appears in the window, right-click the link and select Live View Home
Page.
See page 11 for instructions on how to assign the password.
Assign an IP address in a single device
1. Select a device in AXIS Camera Management and click the
Assign IP button.
2. Select Assign the following IP address and enter the IP
address, the subnet mask and default router the device will
use.
3. Click the OK button.
Assign IP addresses in multiple devices
AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices you wish to configure (different models can
be selected) and click the Assign IP button.
2. Select Assign the following IP address range and enter the
range of IP addresses, the subnet mask and default router the
devices will use.
3. Click the OK button.
AXIS P7224 Installation Guide