1
Your thermostat operates in a frequency band range from 2.4 GHz to 2.4835 GHz, and the maximum radio-
frequency power transmitted in the frequency band is 18 dBm.
A6V10733808_en--_d
2. Set an administrator password to prevent access to advanced
settings.
We recommend a strong password, particularly if the thermostat is
installed in a public location. If you decide to skip this step, you can
also set the password later under
Password.
3. Two ways to set up a network connection:
·
Select Network
– Follow the on-screen step-by-step instructions
to connect to a WLAN
·
Push Button Setup
Note:
You can skip this step if the network connection fails or you want to
connect to the network another time.
Using the WPS router feature:
a. Press the WPS button on your router when prompted by your
thermostat.
b. Tap
Connect
on your thermostat to connect to the network.
c. After a connection is established, continue with other settings as
desired.
4. Select the equipment type.
· Tap
to manually configure the thermostat.
· Select the type of heating system corresponding to your
thermostat.
> Advanced Settings >
1
network.
– Connect to a WPS compatible router.
5 / 68