Placing In Service; Cleaning, Care And Storage - Solo 403 Manual Del Usario

Safety directives and general instructions
 Compliance with this safety manual is a
prerequisite for proper operation of the sprayer.
 The pressure sprayer must be checked before
each use.

This pressure sprayer is suitable for applying
approved liquid plant protection, insecticides,
and weed killing substances, as well as liquid
fertilizers that are available from authorized
dealers. We recommend using only plant
protection substances that are approved by the
German BBA (German Federal Biological
Institute).
 The sprayer must be cleaned when changing the
spray substance. This avoids possible chemical
reactions.
 Do not use liquids over 40°C.

Due to bodily hazard, only the abovementioned
liquid substances may be applied with this
sprayer. Disinfectants and impregnation
substances may not be used.
 Never leave the filled and /or pressurized
pressure sprayer unattended for longer periods.
 For safety reasons, children, young people
under the age of 16, and persons that are not
familiar with these operating instructions, may
not use this pressure sprayer.
 The pressure sprayer must be kept out of the
reach of children.
 The user is responsible relative to third persons.
 The pressure sprayer must be de-pressurized
before disassembly of any component, and
before opening the pump, by pushing on the
pressure valve (a)! Before pushing on the
pressure valve (a), the sprayer must always be
in an upright position. Attention: keep the
sprayer away from your face!
 Do not expose the pressure sprayer to high
temperatures.
Malfunctions of any kind, such as, for example
 leaks at the tank,
 signs of damage, cracks, etc.,
 other irregularities,
is the syringe immediately make pressure on the
safety valve. The sprayer must not be reused, but
must be checked by a qualified person.
The manufacturer was not aware of any harmful
effects on the product materials caused by plant
protection substances at the time the product was
manufactured.
- ENGLISH –
The pressure sprayer must be de-pressurized
before disassembling any component, and before
opening the pump, by pushing on the pressure
valve (a)! Before pushing on the pressure valve the
sprayer must always be in an upright position.
The pump must be removed to fill the spray liquid.
Do not use any tools!
Fill the spray liquid to the fill mark maximum.
Model 403: 1.25 liters / 0.33 US.liq.gal
Model 404: 2.00 liters / 0.53 US.liq.gal
In this regard, follow the safety directives and
insure the correct dosing according to the
instructions provided by the manufacturer of the
spray substance!
Thoroughly mix the liquid, insert pump and refasten
firmly by turning clockwise.
Pump (b) the unit until the operating pressure is
reached in the container. Excessive pressure
escapes automatically through the safety valve. (a)
start the spray process by pressing the shut-off
valve (c). Releasing the shut-off valve stops the
spray process.
The shut-off valve (c) can be blocked in the rest
position with the red clamp, to prevent unintended
spraying.

Cleaning, care and storage

After each use, release pressure, always keeping
the sprayer in vertical position. Empty the
container, carefully clean, and rinse well with clean
water. Do not empty residual quantities of spray
liquid into watercourses; rather dispose of them via
communal disposal systems.
For cleaning operate the sprayer using clean water
(add dishwashing detergent if required).
Occasionally clean the spray nozzle (d) with water
and a soft brush. Never use your mouth to blow
through the spray nozzle!
Never use aggressive, acidcontaining, solvent-
containing cleaning substances (gasoline for
example).
Always empty the sprayer completely and store it
in a location that is dry, frost-free, and protected
from direct sunlight.

Placing in service