Product Information - hawa Concepta 25 Planificación Y Instrucciones De Montaje

Ocultar thumbs Ver también para Concepta 25:
Tabla de contenido
HAWA-Accessoires
2

Product information

Intended use
Connector 55 mm
(2 ")
Intended place of use
This furniture hardware is designed for protected interior rooms.
Tecnical data - Connector 55 mm
Door thickness wood
The Connector 55 mm
Tecnical Data - Connector 110 mm
Door thickness wood
The Connector 110 mm
The guide rollers do not generally leave any permanent marks on the visible sides of the door with the exception of sensitive
surfaces such as softwood.
Article number
Articles are identified by a 5-digit number.
General notes
The document «Safety Instructions (22991)» is an integral component of these installation instructions.
A function check must be performed when installation is completed.
Hand over the instructions and the document on «Safety notes» (22991) to the user after completion of the function check.
Metric dimensions in mm apply - dimensions stated in inches are for information only.
Please retain these instructions; replacements are available at www.hawa.ch
Hawa components.
Indicates practical information and tips that enable the optimum use of machines, equipment or devices
This document demonstrates the intended use based on the example of HAWA-Concepta 50 wood.
Risk and residual risk hazard
The hardware does not pose any risk or residual risk.
If using HAWA-Concepta to conceal electrical appliances, ensure compliance with the safety notes provided by the appliance
manufacturer (heat accumulation). If necessary, use an automatic shutoff device (e.g. Safety Box, www.halemeier.de).
Disposal
Materials, accessories and packaging should be recycled in an environmentally friendly manner.
3
11
/ 110 mm
is used exclusively with HAWA-Concepta.
(4 ")
---- -
---- -
16
32
3
a pivot/slide-in door
(2 ")
---- -
16
19 - 30 mm
3
compensates external side or cabinet body height differences of +/- 1,5 mm (+/-
(2 ")
---- -
16
11
for two pivot/slide-in doors
(4 ")
---- -
32
19 - 28 mm
11
compensates cabinet body height differences of +/- 1,5 mm (+/-
(4 ")
---- -
32
3
3
( "-1 ")
- -
---- -
4
16
3
1
( "-1 ")
- -
- -
4
8
1
.
")
---- -
16
1
.
---- -
")
16
7

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Concepta 30Concepta 40Concepta 50

Tabla de contenido