RS Pro RS-9663 Manual De Instrucciones página 11

Tabla de contenido
Heavy Duty True RMS Digital Multimeter / English
Function
Range
Resolution
40 nF
0.01 nF
400 nF
0.1 nF
4 μF
0.001 μF
Capacitance
40 μF
0.01 μF
400 μF
0.1 μF
4000 μF
1 μF
9.999 Hz
0.001Hz
99.99 Hz
0.01 Hz
999.9 Hz
0.1 Hz
Frequency
9.999 kHz
0.001 kHz
(electronic)
99.99 kHz
0.01 kHz
999.9 kHz
0.1 kHz
9.999 MHz
0.001 MHz
10 - 400 Hz
0.01Hz
Frequency
(electrical)
Sensitivity: 15 V rms
0.1 to 99.9%
0.1%
Duty Cycle
Pulse width: 100 μs - 100 ms, Frequency: 5 Hz to 150 kHz
-50 to 1382°F
0.1°F
Temp
(type-K)
-45 to 750°C
0.1°C
Note: Accuracy specifications consist of two elements:
• (% reading) – This is the accuracy of the measurement circuit.
• (+ digits) – This is the accuracy of the analogue to digital converter.
Enclosure
Double molded, waterproof
Shock (Drop Test)
6.5 ft. (2 meters)
Test current of 0.9 mA maximum, open circuit voltage 2.8
Diode Test
V dc typical
Audible signal will sound if the resistance is less than 35
Continuity Check
Ω (approx.), test current <0.35 mA
18
Accuracy
±(5.0% reading + 10 digits)
±(3.0% reading + 5 digits)
±(5% reading + 10 digits)
±(0.1% reading + 5 digits)
±(0.5% reading)
±(1.2% reading + 2 digits)
±(3.0% reading + 5°C/ 9°F
digits) (probe accuracy not
included)
16/12/2017 Version No. 001
Heavy Duty True RMS Digital Multimeter / English
Temperature Sensor
Requires type K thermocouple
Input Impedance
>10 M Ω V dc & >10 M Ω V ac
AC Response
Averaging
ACV Bandwidth
45 Hz to 1 kHz
≤3 at full scale up to 500 V, decreasing linearly to ≤1.5
Crest Factor
at 1000 V
Display
6,000 counts backlit liquid crystal with bargraph
Overrange Indication
"OL" is displayed
Auto Power Off
15 minutes (approximately) with disable feature
Automatic (no indication for positive); Minus (-) sign for
Polarity
negative
Measurement Rate
2 times per second, nominal
" " is displayed if battery voltage drops below operating
Low Battery Indication
voltage
Battery
One 9 V (NEDA 1604) battery
mA, μA ranges; 0.8 A/1000 V ceramic fast blow A range;
Fuses
10 A/1000 V ceramic fast blow
Operating Temperature
5°C to 40°C (41°F to 104°F)
Storage Temperature
-20°C to 60°C (-4°F to 140°F)
Max 80% up to 31°C (87°F) decreasing linearly to 50%
Operating Humidity
at 40°C (104°F)
Storage Humidity
<80%
Operating Altitude
7000 ft. (2000 meters) maximum.
Weight
436 g (includes holster).
Size
(182 x 82 x 59 mm) (includes holster)
This meter is intended for origin of installation use and
protected, against the users, by double insulation per
EN61010-1 and IEC61010-1 2nd Edition (2001) to Category
Safety
IV 600V and Category III 1000V; Pollution Degree 2. The
meter also meets UL 61010-1, 2nd Edition (2004), CAN/
CSA C22.2 No. 61010-1 2nd Edition (2004), and UL
61010B-2-031, 1st Edition (2003)
16/12/2017 Version No. 001
19
Tabla de contenido
loading

Tabla de contenido