Klarstein 10031434 Manual Del Usaurio página 50

Checking for gas leakage
• Check for leakage of gas after air purging
• See the sections on air purges and gas leak checks
in the installation manual for the outdoor unit.
Attaching the connection pipe
• Attach the pipe after checking for gas leakage,
described above.
• Cut the insulated portion of the on-site piping,
matching it up with the connecting portion.
• Secure the slit on the refrigerant piping side with
the butt joint on the auxiliary piping using the
tape, making sure there are no gaps.
• Wrap the slit and butt joint with the included in-
sulation sheet, making sure there are no gaps.
Important Hints on Isolation
• Insulate the joint of the pipes securely. Incomplete insulation may lead to water leakage.
• Push the pipe inside so it does not place undue force on the front grille.
Connecting the drain hose
• Insert the supplied drain hose into the socket of
the drain pan.
• Fully insert the drain hose until it adheres to a
seat of the socket.
Check for leakage here:
• Apply soapy water and check
carefully for leaking gas.
• Wipe soapy water off after the
check is complete.
Refrigerant
pipe Refrigerant
pipe
Slit
Slit
Tape
Drain
pan
Seal
Drain
hose
Refrigerant
pipe
Insulation
sheet
Auxiliary pipe
Drain
pan
Seal
50