Tabla de contenido
Idiomas disponibles
Idiomas disponibles
If the AUTO size setting is selected and only one line of characters has been
entered, the text can be printed with a character size slightly larger than the
maximum for the installed tape under any of the following conditions.
•1/2" (12-mm)- or 3/4" (18-mm)-wide tape is installed and the text contains
only capital letters
•3/4" (18-mm)-wide tape is installed and the characters are not formatted (i.e.,
the style, underline or frame setting is not applied)
Tape
width
1/4"
(6 mm)
Text
lines
1
12 pts
2
N/A
3
N/A
4
N/A
To change the size setting:
1
While holding down
display the current size setting.
2
While still holding down
setting is displayed.
The current character size setting is also shown by the size indicators
above the display.
3
Release
Code
EXAMPLE
To select the 24 point size setting:
1 While holding down
Size
once, and keep
1
down.
3/8"
1/2"
(9 mm)
(12 mm)
All caps:
18 pts
Not all caps: 24 pts
9 pts
12 pts
N/A
N/A
N/A
N/A
, press
Code
Code
to apply the selected size setting to the entire text.
, press
Code
held
Code
All caps, not formatted:
29 pts
All caps, formatted:
Not all caps, not formatted:
Not all caps, formatted:
18 pts
12 pts
9 pts
Size
once, and keep
1
, continue pressing
A
Wide
A
S I Z E
A U T O
Caps
A
A
A
3/4"
(18 mm)
held down to
Code
Size
until the desired size
1
A
A
A
Auto
Length
A
A
A
57 pts
45 pts
45 pts
36 pts
Underline
Frame
35
Capítulos
Tabla de contenido
Solución de problemas
