Continuity Test - Steren MUL-057 Manual De Instrucciones

Continuity Test

R an g e B u zzer so u n d Accu racy
500V D C /rm s A C
INSTRUCTIONS
MEASURING DC / AC
1.- Connect the red testing point to the jack signaled "VΩmA"
and the black testing point to the jack signaled "COM".
2.- Set the dial to the VDC / VAC setting
When the value to be measured is unknown, set the dial to
the maximum setting. Reduce level by level until reaching the
desired level.
3.- Connect the testing points to the equipment to be measured.
4.- Turn the equipment to be measured on, the voltage will
appear on the LCD display. The polarity will also appear.
ENGLISH-06