Far Tools 118005 Manual De Instrucciones página 37

EN
ENGINE
1- Remove the Saprk plug, about one tablespoon of two-stroke oil into the spark plug.
recoil star the engine by turning over several times (with ignition off) to coat the cilynders
walls with oil.
2- Pull the recoil starter until you feel compression. Then stop pulling. (This prevents the
cylinder and valaves from rusting)
3- Clean exterior of the generator and apply a rust inhibitor.
4- Store the generator in a dry, well- ventilated place, with th ecover placed over it.
5- The generator must remain in a vertical position when stored, carried and operated .
© FAR GROUP EUROPE
groupe electrogène 118005.indd 37 20/02/06 16:16:28