Switching The Power On And Off; Adjusting The Magnification - Optelec Compact 7 HD Manual Del Usuario

Ocultar thumbs Ver también para Compact 7 HD:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 159
Optelec
Compact 7 HD

Switching the power on and off

To switch on the Compact 7 HD for the first time, the unit needs to be charged. Once
charged, press the orange oval on / off switch located on the right of the white Open button
in the centre at the bottom of the screen for one second. The unit will start up in the mode in
which it was switched off. To switch off the Compact 7 HD, press the orange oval button
again for one second.
When switching on the Compact 7 HD, it will take approximately 3 seconds before an image
displays on screen.
The unit can also be switched on by opening it as described earlier. This is a default setting.
Closing the unit will automatically turn it off. The turn-on-upon-opening and turn-off-upon-
closing functions can be enabled or disabled in the menu. Please refer to Chapter 4 for more
information on how to change these settings.

Adjusting the magnification

To change the magnification settings of the unit, simply press the + or – button located on
the right side of the screen. Press the + button to increase or the – button to decrease the
magnification. In the open position, when placed on a document, the magnification level
starts at 2 times and can be increased to 24 times. The Compact 7 HD is equipped with an
auto-focus camera. This allows you to use the unit while holding it in your hands in the
English
Page 21
Tabla de contenido
loading

Tabla de contenido