Idiomas disponibles
Idiomas disponibles
3) Full Screen Mode
• Click on the "Full Scrn" button in the lower right hand side corner of the main screen to display the
recorded image(s) in full screen.
• All the control panels and the buttons will be hidden and only the recorded image(s) will be shown in
the screen in order to make full use of the displaying area of the monitor.
• Right-mouse click on any part of the image to return to the normal control panel display.
4) Sequence
• Click the "SEQ" button on the display control panel set the sequence function to ON or OFF.
• The button will turn yellow to indicate that the sequence function is selected.
• The sequence function applies to all display modes, except for the 16-screen mode.
• The user can select individual camera(s) for sequencing display.
Note: When the unit is in sequence mode, all the camera selection buttons on the display panel will be
blocked. You can click the "SEQ" button to turn it off to regain manual access of the camera
selection.
c. Motion Detection
An advanced digital video-processing algorithm is used to implement the motion detection function in
the DSR.
The motion detection function is designed to automatically detect any activities within a selected
detection area(s), and to start recording of that camera when activity is detected inside the detection
area(s).
Right-click the mouse button on the video screen of the camera you want to set
motion detection.
A "Motion detection setting" dialog box will pop up for motion detection setting.
1) Setting the Detection Area
Simply click on any spot to select/de-select the grid(s) to form detection area(s) of
any shape in the video screen for motion detection. The 'Select all' button is used
to rapidly select the whole video screen for detection. The 'Clear all' button is used
to de-select all selected areas.
2) Indicating the Detection Area
If you want the detection area to be shown on the video screen during normal
operation, click the 'Show at all times' button.
If you don't want the detection area to be shown in the video screen during normal
operation, click the 'Not show' button.
VCC2
5
VELLEMAN
