Idiomas disponibles
Idiomas disponibles
Note:
-- The start and end time is needed for scheduled recording.
-- The input time is in the 24-hour HH:MM format
-- The factory default setting of the weekday recording start time is 0:0 and the default end time is also
0:0. Under this default setting, the camera will start recording on Monday 0:0 and end on Tuesday 0:0
and will immediately start again on Tuesday at 0:0. This will be repeated all over again for the
remaining weekdays. Therefore, weekday recording will record at all times from Mondays 0:0 through
Saturdays 0:0.
b) Scheduled Weekend
-- Weekend scheduled recording also has the default 0:0 start time and 0:0 end time.
-- Under default start and end time the unit will start recording at Saturday 0:0 through Saturday 0:0.
c) Alarm
-- Click the 'ON' box of the corresponding camera to enable the alarm input and the alarm recording
function.
-- Enter the alarm recording duration in seconds.
-- Enter the number of frames per second for the individual cameras. The default frame rate is 25 fps.
d) Pre-Alarm:
-- The pre-alarm recording function will be available once the 'alarm enable box' is clicked.
-- Click the 'ON' box in the pre-alarm column to enable the pre-alarm function of the corresponding
camera(s).
-- Input the pre-alarm duration from one to 60 seconds.
-- Every time the alarm is triggered, the pre-alarm recording image will be saved into a permanent file
which can be retrieved for playback.
Tip:
The pre-alarm lets you review images prior to the actual alarm event. Also, the pre-alarm only keeps the
images when the alarm is really taking place so that the storage space can be used more effectively.
This mode is more effective than scheduled recording.
Scheduled Alarm and Motion Detection Setting:
-- Click the 'Alarm Sch' button to enter the alarm scheduler.
-- Check the camera box to enable the alarm schedule function for that particular camera.
-- When a camera is not checked, the alarm schedule function will not apply to this camera. The motion
detection and alarm input function will trigger the alarm recording as usual.
-- The entire camera check box is unchecked by default.
-- Enter a time slot for each checked camera. The alarm recording function will be enabled at this time
slot every day.
-- When the start and stop time are set at 0, the alarm function will work all the time.
-- The user can save the schedule with a file name or he can open an existing schedule by clicking the
'file button' in the upper left hand corner.
e) Instant Recording Setting
-- Enter the desired frame per second for individual cameras.
Tip: Eight frames per second or above is recommended for instant recording to capture real-time video.
VCC2
17
VELLEMAN
